Sodium Molybdate

Chemical Composition %

Mo % min

% max
Pb Fe Cu Cl NO3 NH4 PO4 water insolubles

39.20

 0.005 0.005 0.005 0.15 0.02 0.05 0.005 0.1

¡¡High Pure Sodium Molybdate

Chemical Composition %
Mo£¨% min)

% max
Cl NO3 SO4 NH4 PO4 heavy metals£¨Pb£©

water insolubles
39.5 0.05 0.02 0.01 0.001 0.01 0.001 0.01

Ammonium Molybdate

Standard Q/JDC010-2000

Product  ¡¡¡¡¡¡  

  ¡¡¡¡¡¡ Item

   ADM    Ammonium Dimolybdate

    AQM      Ammonium  Quartmolybdate

   AHM     Ammonium Heptamolybdate
Fisher Average Particles Size£¨¦Ìm) 15¡«30 10¡«30 15¡«30
Bulk Gravity£¨g/cm3) 0.8¡«1.40 0.6¡«1.40 0.9¡«1.40
Water Solubility£¨25¡æ) ¡Ý40g/100ml Trace ¡Ý63g/100ml
Brand MSA-1 MSA-2 MSA-3
Mo (%)¡Ý ADM£º56.00            AQM£º56.00            AHM£º54.00
Other ¡¡Element¡¡ Content (%)¡Ü K 0.0065 0.0100 0.0180
Na 0.0005 0.0010 0.0010
Fe 0.0005 0.0008 0.0010
Al 0.0005 0.0006 0.0010
Si 0.0005 0.0005 0.0010
Sn 0.0005 0.0005 0.0010
Pb 0.0005 0.0005 0.0005
P 0.0005 0.0005 0.0010
Mg 0.0005 0.0005 0.0010
Ca 0.0006 0.0008 0.0010
Cd 0.0006 0.0006 0.0006
Sb 0.0006 0.0006 0.0006
Bi 0.0006 0.0006 0.0006
Cu 0.0003 0.0003 0.0005
Ni 0.0003 0.0003 0.0005
Mn 0.0003 0.0003 0.0005
Cr 0.0002 0.0007 0.0007
W 0.0050 0.0070 0.0100
Ti 0.0003 0.0005 0.0005
Use For Example  Reducing Molybdenum Powders and Swaging Molybdenum Wires  Producing Pure Molybdenum Trioxide  Petroleum Refining Catalysts

White crystals. Size¡Ü40mesh.
Physical properties and uses:
1)

ADM[£¨NH4£©2Mo2O7]soluble in water and aqueous alkali.Used for pure molybdenum trioxide,molybdenum powders,sheets,wires and other components.And widely used for petroleum hydrogenation,desulfurizateon,refining and chemical fertilizer catalysts.
2)¡¡

AQM[£¨NH4£©2Mo4O13¡¤2H2O]lowsoluble in water.Soluble in aqueous alkali and liquid ammonia.For producing petroleum hydrogenation,desulfurization,refining and chemical fertilizer catalysts.
3)¡¡

The water soluble emulsion of AHM[£¨NH4£©6Mo7O24¡¤4H2O] is good.It is widely used for chemical petroleum catalyst,agriculture,Molybdenum metals and special for vinyl cyanide catalyst.

Package£º
1)

P.P woven bag of 25kg, 50kg and 1000kg net each
2)

Fiberboard pot of 25kg net each

3)

Steel drum of 50kg net each 

All above have double plastic bags inner. Your special requests available.

¡¡Pure Molybdenum Trioxide

Standard Q/JDC015-2000

Brand     

   Chemical Composition %

 MoO3-1 MoO3-2
Mo  (%)¡Ý 99.90 99.80
Other Element Content  (ppm)¡Ü Al 15 50
Ca 15 50
Cr 10 30
Cu 15 30
Fe 15 50
Mg 10 30
Ni 10 20
K 60 300
Si 20 50
Na 20 30
P 5 10
Pb 5 20
Ti 10 30
S 50 80
Sn 15 50
W 100 200
As 10 -

Light yellow or light green powder.Particles size¡Ü40mesh Bulk gravity:0.7-1.1g/cm3.

It is lowsoluble in water and soluble in aqueous alkali.

Molybdenum phosphate what it reacted with phosphate has very high purity.

MoO3£ºcontent¡Ý99.95%.

Uses£ºMoO3-1 for rekucing molybdenum powder.MoO3-2 for fission catalyst.hydrogenation catalyst.painting.ceramics and glass production.

Package: 1)P.P woven bag,25kg or 50kg met each¡¡
¡¡ 2)Fiberboard pot of 25kg net each¡¡
¡¡ 3)Steel drum of 50kg met each¡¡

     All above have double plastic bags inner. Your special requests available

Molybdenum Powder

Standard Q/JDC013-2000

Bulk Gravity¡¡(g/cm3) 0.85¡«1.15 0.95¡«1.4 1.40¡«1.60
Particle Size¡¡(µm) <2.0 2.0¡«3.5 3.5¡«5.0

                        Brand   

  Chemical Composition¡¡

 MP-1 MP-2 MP-3
Mo (%)¡Ý 99.95 99.90 99.80
Other Element Content (ppm)¡Ü fe 50 60 100
*Al 15 20 50
As 10 ¡ª ¡ª
Ba 10 ¡ª ¡ª
C 40 75 ¡ª
Ca 20 20 50
Co 30 ¡ª ¡ª
Cr 20 20 50
Cu 10 20 30
*K 20 ¡ª ¡ª
Mg 10 20 20
Mn 5 10 ¡ª
Na 10 ¡ª ¡ª
Ni 10 20 10
O 500¡«1000 2000 2500
P 10 20 ¡ª
Pb 10 10 ¡ª
S 20 ¡ª ¡ª
*Si 10 30 200
Ti 10 10 ¡ª
W 100 300 ¡ª
Use For Example Precision Manufacturings Molybdenum Wires and Sheets Alloy Addition

Uniform grey powder. Size¡Ü160mesh.

Used for processing the material of molybdenum wires,sheels,electronic components,pure molybdenum,sintered molybdenum alloy metals products and super alloy additive as well.

Package£º ¢ÅPlastic bottles in wooden box¡¡
¡¡

¢ÆSteel pot of 25kg net each with plastic bag inner
Your special requests available.¡¡
Note£º

The elements with * acc. to your requests.

 Molybenum Plates

Standard Q/JDC 016-2000

brand

Chemicl Composition

 Mo-1 Mo-2 Mo-3
Mo (%)¡Ý 99.95 99.95 99.95
 Other Element Content (%)¡Ü Pb - - 0.001
Bi - - 0.001
Sn - - 0.001
Sd - - 0.001
Cd - - 0.001
Fe 0.005 0.006 0.010
Ni 0.002 0.003 0.005
Al 0.002 0.002 0.005
Si 0.003 0.003 0.010
Ca 0.002 0.002 0.005
Mg 0.001 0.002 0.003
P 0.001 0.001 0.002
C 0.005 0.008 0.010
O 0.003 0.005 0.050
N 0.001 0.003 -
Use For Example  Precision Manufacturings Standard Manufacturings Alloy Addition

Silver grey or grey metallic luster. Density ¡Ý9.6g/cm3.
Used for processing material of molybdenum disks. sheets and foils, etc.
Package£º

¢ÅIn dry wooden box of 1.0 kg net each wrapped with paper, plastic bag and carton.
¡¡

¢ÆIn wooden box of 7.0 kg net each firmed with blown molding foam. 30kg weight Max. of each box.

Your special requests available.

Molybdenum Rods

Standard Q/JDC 016-2000

brand   

 Chemicl Composition

 Mo-1 Mo-2 Mo-3
Mo (%)¡Ý 99.95 99.95 99.95
 Other Element Content (%)¡Ü Pb - - 0.001
Bi - - 0.001
Sn - - 0.001
Sd - - 0.001
Cd - - 0.001
Fe 0.005 0.006 0.030
Ni 0.002 0.001 0.005
Al 0.002 0.002 0.005
Si 0.003 0.001 0.010
Ca 0.002 0.002 0.004
Mg 0.001 0.001 0.003
P 0.001 0.001 0.002
C 0.005 0.003 0.010
O 0.003 0.005 0.008
N 0.001 0.001 -
 Use For Example Drawing Molybdenum Wires  Spraying Molybdenum Wires High Temperature Resistance Components

¡ôSilver grey metallic luster,Density¡Ý9.6g/cm3.
¡ôUsed for producing molybdenum line-cutting.filament,coil wire,lead wire support,electron vacuum components and grid,etc.

¡ô Package:

1)¦Õ17mm,in wooden box of 30kg Max.of eachfirmed with blown molding foam spacer
¡¡

2)¦Õ£¾17mm,in wooden box of 100kg Max.of each firmed with blown molding foam

Molybdenum Wirens 

Standard Q/JDC020-2000


Chemical Composition£º
Mo Content ¡Ý99.95%
Other Elements Content Total ¡Ý0.05%
Each Element Content ¡Ý0.01%

Elongation£º
d  (µm) Elongation Min (%)
30¡Üd¡Ü49 11.0¡«13.0
49<d¡Ü80 14.0¡«15.0
80<d¡Ü100 16.0
100<d¡Ü200 17.0
200<d¡Ü300 17.5
300<d¡Ü700 18.0

Tensile Strength£º
d  (µm) 200mm Tensile Strength Min. (N/mm2)
Filament LineCutting
20<d¡Ü70 3389 3389
70<d¡Ü130 3013 3013
130<d¡Ü200 2824 2824
200<d¡Ü300 2561 2561
300<d¡Ü450 2372 £­
450<d¡Ü700 1040 £­

Dimension£º

d(µm) Weight 200mm(mg) 200mm Deviation of Weight(%) Deviation of Diameter (%)
Gr.¢ñ Gr.¢ò Gr.¢ñ Gr.¢ò
20¡Üd<30 0.65¡«1.47 ¡À2.5 ¡À3 ¡ª ¡ª
30¡Üd<40 >1.47¡«2.61 ¡À2.0 ¡À3 ¡ª ¡ª
40¡Üd<100 >2.61¡«16.33 ¡À1.5 ¡À3 ¡ª ¡ª
100¡Üd<400 >16.33¡«256.2 ¡À1.5 ¡À3 ¡ª ¡ª
400¡Üd<600 ¡ª ¡ª ¡ª ¡À1.5 ¡À2.5
600¡Üd<2500 ¡ª ¡ª ¡ª ¡À1.0 ¡À2.0

It is regular black covered with graphite. After removed graphite, it is metallic luster.
Used for grids in electron tubes,hook,support bar,wire core and cutting lines, etc.
Package£º

¢Åd<400µm, coils on plastic spool in plastic box or vacuum packing.
¡¡

¢Æd¡Ý400µm,in coils firmed by plastic tapes or vacuum packing.¡¡

Your special demands on length or weight available.

Spray Molybdenum Wires

Standard Q/JDC014-2000


Specification£º
Diameter (mm) Tolerance of Diameter (mm) Single Wire Weight (kg) Length of Single (m) Diameter of Wire Coil (mm)
1.41¡«1.51 -0.04¡«+0 4¡«10 250¡«600 450¡«600
1.51¡«1.62 -0.04¡«+0 4¡«10 220¡«480 450¡«600
1.91¡«2.00 -0.04¡«+0 5¡«12 170¡«380 450¡«600
2.21¡«2.30 -0.05¡«+0 5¡«12 130¡«280 450¡«600
2.31¡«2.40 -0.05¡«+0 6¡«12 130¡«350 600
3.10¡«3.18 -0.05¡«+0 6¡«12 80¡«200 600

Brand    

 Chemical Composition

 PMO-1 PMO-2

Mo (%)¡Ý

 99.95 99.95

Other Element Content

(ppm)¡Ü

 Ag 5 ¡ª
Al 20 20
As 5 ¡ª
Ba 10 ¡ª
C 30 80
Ca 20 20
Co 30 ¡ª
Cr 20 ¡ª
Cu 10 ¡ª
Fe 60 60
Mg 10 10
Mn 10 ¡ª
Ni 10 10
Na 10 ¡ª
Nb 10 ¡ª
O 50 60
P 20 ¡ª
Pb 10 ¡ª
S 20 ¡ª
Si 10 30
Ta 20 ¡ª
Ti 10 10
W 100 300
Zn 5 ¡ª
Zr 5 ¡ª

Use For Example

 Clutch throwout fork, Synchro mesh ring gear, etc.

Mechanical Properties£º
d ¦Õ(mm) Tensile Strength Elongation (%)
¦Õ1¡«2 850 5
¦Õ2¡«3 800 5
¦Õ3¡«4 700 5

¡ôSingle wire of 10kg has no welded joint.
¡ôIt is regular black with smearing graphite surface. After removed graphite,itis metallic luster.
¡ôDensity£º10.2gcm3
¡ôRefining spraying for wear and tear parts of truck and mechanical wearing to enhance their wearability.
¡ôCoils in carton wrapped with waterproof paper and plastic bag inner and firmed by waterproof paper and blown molding foam at the bottom.

¡¡Moly Metal Bar


Specification£º

Chemical Composition (%)

MO (% min)

Impurities (%max each)
W Fe Si Ni O C Al As Mg Cu p

99.8

 0.05 0.05 0.05 0.05 0.05 0.02 0.01 0.001 0.002 0.002 0.002
Size£º

(150¡Á55¡Á16¡À10%)
Pckg£º  In iron drums of 250kgs net on pallets¡¡
Usage£º 

As additives for alloys.¡¡